Castellation PCB design uses plated half-holes along board edges to connect separate circuit boards directly.
Common in compact electronic modules, this structure requires accurate hole geometry, reliable copper plating, and compatible solder pads.
What Is a Castellation PCB?
A castellation PCB has plated through-holes positioned along its board edges. After routing, part of each hole is removed, leaving exposed semicircular copper terminals.
Understand the Half-Hole Structure
Unlike conventional through-holes located inside a PCB, castellated holes cross the board outline. Routing exposes part of the plated copper barrels, creating solderable terminals.
The terminals allow a small module to connect directly to matching pads on a carrier board without separate connectors.
Identify Common Applications
Castellated PCBs are commonly used in Wi-Fi and Bluetooth modules, wireless communication boards, industrial control modules, sensors, and embedded electronic assemblies.
This structure is suitable for applications where a complete circuit is manufactured separately and installed onto a larger PCB.
What Are the Key Castellation PCB Design Requirements?
Half-hole reliability depends on hole dimensions, copper pads, board outlines, and neighboring features. All these elements should be considered together during PCB layout.
Define Hole Dimensions
The drill diameter determines the plated hole size and finished half-hole profile, while the surrounding copper pad provides the solderable area. The pad must retain sufficient copper after routing to prevent weak terminals or copper peeling.
VictoryPCB publishes the following minimum design capabilities for castellation PCBs:
| Design Parameter |
Minimum Value |
Design Purpose |
Design Consideration |
| Drill diameter |
0.5 mm |
Defines the plated hole size and half-hole profile |
Match the required terminal size and board thickness |
| Pad diameter |
0.8 mm |
Provides copper for soldering and electrical connection |
Retain sufficient copper after edge routing |
| Pad-to-pad spacing |
0.15 mm |
Defines spacing between adjacent pads |
Maintain clearance to reduce bridging and routing risks |
These are manufacturer-specific reference values. Confirm the applicable limits according to board thickness and manufacturing conditions. Also clarify whether pad spacing refers to edge-to-edge clearance or another measurement in the fabrication specification.
Set Hole Spacing
Insufficient spacing can weaken the board edge or complicate routing. Adequate separation between adjacent holes helps preserve the remaining board material and supports consistent edge processing.
Control Edge Position
The board outline must intersect each plated hole at the intended position. Incorrect alignment may create uneven half-hole profiles, reduce the solderable area, or remove too much copper.
Plan Solder Mask Openings
The solder mask should not cover the half-hole barrel or intended solderable pad area. Review nearby copper traces and planes to prevent unintended exposure or routing damage. Clearly identify the required openings in fabrication files.
How Are Castellated Holes Manufactured?
Castellation manufacturing involves drilling, plating, circuit processing, surface finishing, and edge routing. Each stage affects the quality of the finished terminals.
Control Hole Plating
The manufacturer drills plated through-holes at the planned board edges. Copper plating forms conductive barrels and connects the required PCB layers.
Because part of each barrel remains exposed after routing, plating continuity and adhesion are important. Insufficient or uneven copper can weaken the terminals.
Control Edge Routing
After plating and circuit processing, mechanical routing cuts through the holes along the board outline. The routing position must expose the intended portion of each hole. Poor alignment can create irregular edges or insufficient copper retention.
Inspect Finished Half-Holes
Inspect finished castellations for burrs, copper peeling, cracks, and uneven profiles. Exposed copper should remain continuous and suitable for soldering. Visual inspection and cross-section analysis help identify plating and structural defects.
How to Ensure Castellation PCB Assembly Quality?
Reliable board-to-board connections require compatible carrier pads, suitable surface finishes, and controlled soldering conditions.
Match Carrier Pad Geometry
The carrier PCB should have pads that align with the module’s castellated terminals. Pad width, pitch, board outline, and placement tolerance should be reviewed together. Poor alignment can reduce solder contact and create inconsistent joints.
Select a Suitable Surface Finish
Surface finish affects solderability and copper protection. ENIG and other solderable finishes may be selected according to assembly requirements, storage conditions, and process compatibility.
Edge plating and castellation are different structures, so the required terminal design must be specified separately.
Control Soldering Conditions
Reliable joints depend on solder paste volume, pad geometry, component placement, and reflow conditions. Too little solder can produce weak joints, while excessive solder may cause bridging between adjacent terminals. Validate the assembly process with representative samples before volume production.
How to Prepare Castellation PCB Files for Manufacturing?
Clear fabrication documentation helps prevent misunderstandings between the designer, manufacturer, and assembly team.
Specify Half-Hole Features
Identify castellated edges, hole dimensions, pad geometry, board outline, and plating requirements. Drill and routing data must clearly indicate which holes are intended to become plated half-holes. Do not rely on the manufacturer to identify the features from the outline alone.
Confirm Fabrication Requirements
Provide the manufacturer with the PCB stackup, board thickness, finished hole and pad dimensions, hole pitch, edge position, copper plating requirements, solder mask openings, and surface finish.
Include the carrier board footprint and assembly requirements where available. Early design for manufacturing (DFM) review helps identify potential issues before production.
FAQ
What Is the Difference Between a Castellation Hole and a Regular Plated Through-Hole?
A regular plated through-hole remains inside the PCB, while a castellated hole is positioned on the board edge and partially removed through routing. The exposed half-barrel serves as a solderable terminal.
Can Castellation PCBs Be Soldered Directly to Another PCB?
Yes. Castellated terminals can align with matching pads on a carrier PCB and be soldered during assembly. The footprint, placement tolerance, and soldering process must support reliable contact.
Why Does a Castellation PCB Need Special Manufacturing?
Castellation requires plated holes to be accurately positioned along the board outline and partially removed through routing. This adds edge-processing and inspection requirements beyond standard PCB fabrication.
Conclusion
Reliable castellation PCB design requires accurate half-hole geometry, consistent plating, and compatible assembly pads. Contact
VictoryPCB to discuss your design and manufacturing requirements.